Speedrite Remote Fault Finder

Speedrite Remote Fault Finder

Smart 2-in-1 tool featuring a remote control function to turn your compatible Speedrite energizer on or off anywhere along the fence line, as well as a built-in volt and current meter for the rapid location of electric fence faults.

The Speedrite Remote Fault Finder is compatible with the 6000i, 12000i, 18000i and 46000w Speedrite Energizers

Speedrite Remote Fault Finder

• Quickly and easily locates faults along the fence line
• Large back-lit display
• Displays current, voltage and current direction simultaneously
• Displays previous current reading to compare values
• Audible current indicator
• Convenient belt clip
• Insulated, rugged, water resistant case
• Replaceable 9 V battery
• Low battery warning system
• Automatic energizer polarity detection
• Fault Finding option can be used with all energizers
• Turns compatible Speedrite energizer on or off from anywhere along the fence line.
• 1 year warranty*

No matter how good an energizer is, if the fence line is badly insulated, has shorts, or is poorly grounded, it will perform well below its optimum. Advances in remote and fault‑finding technology mean you can quickly locate and fix faults on your fence with a minimum of fuss.

How to Use the Speedrite Remote Fault Finder

Start near the energizer’s lead-out wires with your Speedrite Remote with Fault Finder or your Speedrite Fault Finder. Move down the fence line following the arrow away from the energizer. Take readings at regular intervals and at any junction point. The previous current reading is shown briefly in the top right corner of the screen so that you can compare readings. If the current reading suddenly falls, you have gone past a fault. Retrace your steps to find the fault. Note that after a few seconds the previous current reading will be replaced with the present voltage reading (kV).

Download the Speedrite Remote Fault Finder Manual